GGsXC
New Member
- Posts
- 7
- Location
- Battle, east sussex
hi, my wife drove our 53 plate disco 2, td5 103,000 mls on clock, home, parked up as normal. We went to go out 20mins later, nothing turning over and the dreaded s & m lights were on.
Checked selector was in park, shuttled the door locks several times and alarm is activating as normal.
Locked and unlocked the drivers door with the key.
Metered battery which was showing 12.7v, removed and charged, replaced back on vehicle, still nothing, metered and although the lights not dimming dropping to 12.3 on key turn so bought a new one (karching)
New one fitted showing 14.7v, still nothing
Put wipers on, selected reverse, bleeper and rear wipe come on suggesting selector xyz still in-line.
Slight oil in ecu plug but loom replaced about year ago (7000mls)
used fault code finder but no codes found........
Before I jump to replacing xyz am I missing anything.
Thanks in advance
GGsXC
Checked selector was in park, shuttled the door locks several times and alarm is activating as normal.
Locked and unlocked the drivers door with the key.
Metered battery which was showing 12.7v, removed and charged, replaced back on vehicle, still nothing, metered and although the lights not dimming dropping to 12.3 on key turn so bought a new one (karching)
New one fitted showing 14.7v, still nothing
Put wipers on, selected reverse, bleeper and rear wipe come on suggesting selector xyz still in-line.
Slight oil in ecu plug but loom replaced about year ago (7000mls)
used fault code finder but no codes found........
Before I jump to replacing xyz am I missing anything.
Thanks in advance
GGsXC