HELP! i GOT A PIECE MISSING

Now then, a previous owner of my series 3 did a clutch change at some point and removed the panels between the gearstick and the bulkhead. He forgot (!?!) to put it back. I have the large part that sits over the gearsticks, and the part that joins onto that, but am missing the last piece that is actually riveted (?) to the bulkhead. Any ideas where I could source one? I dont see it listed with anyone. Cheers

Load up a photo where the missing part should be. Look on ebay for anyone breaking a Landy.

Sounds like you need part 330069

http://www.landrover-parts.net/proddetail.php?prod=S2-330069

I could probably get one if you get me pics

Erm, I actually got that part (2 of them), its what goes between that and bulkhead. I will try and sort a pic out by this afternoon - my phone aint up to much! Thanks for your responses

In that case... I have some bad news for you....



The next bit IS part of the bulkhead...

Oh no really? I can see it now. Im probably gonna have to make the part, its the part that protrudes from the flat area of bulkhead. That pic may actually help me in that case, thanks

yeah afraid it sound like the previous owner got a bit too keen with a grinder

You might be able to buy replacement sections to weld on...

where bouts are you matey as i could recreate and refit that part if you can get the bulkhead to manchester for a day

on the later s3 bulkheads wasn't that part detachable and screwed onto the bulkhead, maybe one of those would fit or could be slightly altered, if anyone still makes them of course.

Bump said:

In that case... I have some bad news for you....

The next bit IS part of the bulkhead...

Click to expand...

is that a brand new bulkhead bump or a resto,d one?

looks like a perfect paint job, really smart.

If you had wanted that part you should have told me I sliced it out of mine the other week with the grinder then melted it in the incinerator

honolulujoe said:

is that a brand new bulkhead bump or a resto,d one?

looks like a perfect paint job, really smart.

Click to expand...

I'm afraid it's just a Google image i quickly pulled up for purposes of showing the OP what it is meant to look like.

My bulkhead is currently having a lot of welding done to it by my garage to keep it going, i can only dream of it looking like that one!

whoever did do it should be proud of themselves that is a quality job.

johnny curt 1 said:

where bouts are you matey as i could recreate and refit that part if you can get the bulkhead to manchester for a day

Click to expand...

Im in West Wales, best part of 200 miles! thanks for offering anyway. That part is mild steel I assume?

Bump said:

yeah afraid it sound like the previous owner got a bit too keen with a grinder

You might be able to buy replacement sections to weld on...

Click to expand...

Your right he went bit mad. I might give Craddocks a tinkle see if they got anything similar, cheers

Hallelujah, Pegasus Parts got them in stock £30! sorted. thanks.

Andrewrp6 said:

Hallelujah, Pegasus Parts got them in stock £30! sorted. thanks.

Click to expand...

That's good news Glad you've got it all sorted.