Hi all, My name is John and i am new to this Landy scene, My 13 year old son badgered me to get a Landy to "do up" so after searching on good old Ebay i found myself the proud owner of a project 88 inch 72 petrol one.
Now the guy bought this 11 years ago and has done most of the hard work ie chassis and bulkhead are mint, good running gear etc but some parts are obviously missing and as he stripped it and not me it is a challange to find out where things go.
My problem is this, it is a pickup but when you offer up the rear cab section and align it up with the doors there is a gap along the back...Should this be a double skinned panel (ie interior panel is where the seat back goes then another panel in the pickup back which would attatch to the cab)
I hope this makes sense and if it does where do i get the filler panel many thanks in advance.
John
Now the guy bought this 11 years ago and has done most of the hard work ie chassis and bulkhead are mint, good running gear etc but some parts are obviously missing and as he stripped it and not me it is a challange to find out where things go.
My problem is this, it is a pickup but when you offer up the rear cab section and align it up with the doors there is a gap along the back...Should this be a double skinned panel (ie interior panel is where the seat back goes then another panel in the pickup back which would attatch to the cab)
I hope this makes sense and if it does where do i get the filler panel many thanks in advance.
John
Last edited:
