Heated windscreeen

S

Surfstarbat

New Member

Posts

14

• Nov 10, 2013

• #1

Hi Guys
New on here , so had a quick search and cant find anything so.....
I have put a heated windscreen in my disco wiring loom was already present, so I purchased a switch and relay and put in and still doesn't work. there is power to the relay but not to the switch. all the relevant fuses also have power.
Any ideas before a trip to the local independent garage:cool2:

 

PaulMc

Active Member

Posts

640

Location

Kent

• Nov 10, 2013

• #2

Surfstarbat said:

Hi Guys
New on here , so had a quick search and cant find anything so.....
I have put a heated windscreen in my disco wiring loom was already present, so I purchased a switch and relay and put in and still doesn't work. there is power to the relay but not to the switch. all the relevant fuses also have power.
Any ideas before a trip to the local independent garage:cool2:

Click to expand...

There's no power at the switch (other than the illumination on pin 2).

The switch makes a momentary path to earth, to signal the BCU to switch on the heated windscreen for the timed period.

The BCU does this by switching the heated windscreen relay's coil to earth.

So, you will have power at the relay, but it's not being switched to the windscreen.

The heated windscreen setting needs enabling in the BCU

This can be done with Nanocom, Hawkeye, etc..., or by a main dealer or specialist garage.

.

 

S

Surfstarbat

New Member

Posts

14

• Nov 10, 2013

• #3

Confirmation of what I thought. Thanks very much!!

 

discodrivercumbria

Well-Known Member

Posts

3,317

Location

South lakes

• Nov 10, 2013

• #4

where are you? i did mine and switched on with my hawkeye, somebody might be near you and help you do it for a beer token!!

 

S

Surfstarbat

New Member

Posts

14

• Nov 10, 2013

• #5

Dudley ..West mids.
Have beer token available and bottled home Brew!!!