heated seat

corgi2 · Mar 6, 2011

Hi all, firstly i have a def90 csw 2002 heated seats but drivers one doesnt work, having removed the seat, by the fuse box there is a molex type plug that goes to the seat, but i cant see anywhere it plugs in!!! help passenger one works fine, any ideas?? also have switch on dash that says light2 on it any ideas? oh yea buy the way when i push the button on the dash for my heated seat that dont work, the light still comes on HELP COLD BUM!!!!!!

bluesticky1 · Mar 6, 2011

How about looking for where the passenger seat plugs in? Might give a clue as to where the driver's seat lead goes.

COA · Mar 6, 2011

Why not just send out the wife, dog or suitable small child to pre-heat your seat? Only seems fair.....

PaulMc · Mar 6, 2011

corgi2 said:
Hi all, firstly i have a def90 csw 2002 heated seats but drivers one doesnt work, having removed the seat, by the fuse box there is a molex type plug that goes to the seat, but i cant see anywhere it plugs in!!! help passenger one works fine, any ideas?? also have switch on dash that says light2 on it any ideas? oh yea buy the way when i push the button on the dash for my heated seat that dont work, the light still comes on HELP COLD BUM!!!!!!

It's an AMP 2-Way Sealed MQS Connector

The 'Tell-Tale' indicator on the switch will light up in the 'ON' position, whether the seat heater is working or not, because the indicator is connected to the output side of the switch.

This is where the connector (C1403) is mounted under the driver's seat -

This picture is for the 2007 Defender (same as the 2002, but the picture is a little clearer) -

.

burrito · Mar 6, 2011

I had the same problem and found a wire had come off the heater pad in the seat back. Soldered it back on yesterday.

If you have a multimeter it should be easy to see whether you are getting power to the seats and where it is going missing.

Check out this thread, there is a wiring diagram.

http://www.landyzone.co.uk/lz/f7/heated-seats-90-td5-xs-101564.html

corgi2 · Mar 15, 2011

Thanks everyone, pictures great help thanks

Pete

corgi2 · Aug 24, 2011

hi long time no speak = had to do some diy to keepwifey happy!! i still cant find where this plug goes the wire that goes to the seat bottom is in place- but doesnt heat, the light comes on on the switch, also seperatly when i start the engine the fuel gauge drops to zero for a split sec then come back to normal any ideas? thoight it could be the earth

cheers Pld

heated seat

corgi2

New Member

bluesticky1

New Member

COA

New Member

PaulMc

Active Member

burrito

Active Member

corgi2

New Member

corgi2

New Member

Similar threads