Alibro
Well-Known Member
- Posts
- 7,150
- Location
- Northern Ireland
Just to confirm, did you change the water pump?
where abouts are you nodges?
well just a quick update ....i put hose on expansion tank to see if i got flow through rad outlet....not a drop.so the recon head will be ordered tomorrow,
as i will have the engine apart and because of the current blocked head i was planning on flushing the whole cooling system starting at heater matrix can i remove both pipes at bulkhead and put hose through the matrix? plan to do all coolant pipes this way to make sure no blockages.....want to do the job properly and thouroghly as im bored chasing this damn thing now i want to drive it!
thanks htr,
i plan to do the rad flush too, can u tell me......i dont really want to run the car in its current state now untill i have it done so...if i drain the rad, block the bottome hosee part off put cleaner in(not sure what sort yet) and fill with water,leave over night...wouldd that be any use?
fed up chasing my tail with it trax, and after advice from garage and a couple of others ive decide to replace it...all parts ordered.busy weekend ahead i hope weather holds
fed up chasing my tail with it trax, and after advice from garage and a couple of others ive decide to replace it...all parts ordered.busy weekend ahead i hope weather holds
Some of the guys over in ,org recommend a dishwater tablet in the system for a few hundred miles. Any thoughts from the Freeby experts?
Some of the guys over in ,org recommend a dishwater tablet in the system for a few hundred miles. Any thoughts from the Freeby experts?
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!