Can anyone tell me how to remove the hazard warning switch on my P38 to replace the bulb? I can pop the red cover off, but can't see how to release the switch itself. I presume the bulb is easy to access once the switch is out. Also, does anyone know that the 'spare' switch to the left of the cruise control is for? Mine's just got a blanking plate in it.
Hazard switch - P38
- Thread starter diapason
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 16,475
If you have an Auto...that is where the ratio change switch would be on the manual version of the car....
Also I believe you have to remove the centre switch panel itself and release the switch from the rear.
Also I believe you have to remove the centre switch panel itself and release the switch from the rear.
- Posts
- 58,170
- Location
- Preston Lancs.
So has mine it's for the automatic tampon remover. Or ratio change switch on a manual take your pick.
Dragonwalker
Well-Known Member
- Posts
- 3,303
- Location
- Out the back
- Posts
- 58,170
- Location
- Preston Lancs.
Dragonwalker
Well-Known Member
- Posts
- 3,303
- Location
- Out the back
- Posts
- 58,170
- Location
- Preston Lancs.
I know how to remove the dash thanks. But you still have to remove the centre facia switch panel to get the switches out.
Dragonwalker
Well-Known Member
- Posts
- 3,303
- Location
- Out the back
No I don't
Dragonwalker
Well-Known Member
- Posts
- 3,303
- Location
- Out the back
- Posts
- 58,170
- Location
- Preston Lancs.
Yes you do, obviously you don't have a clue what you are on about. You need to remove the centre facia panel with the switches in. To do that you need to get at it's mounting screws to do that you need to remove or displace several other items. When you have done it a few times as i have you know what has to be removed and what hasn't.
Dragonwalker
Well-Known Member
- Posts
- 3,303
- Location
- Out the back
No, I don't
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Tell us how then please, and don't say remove engine, cut bulkhead etc.
- Posts
- 18,999
- Location
- Buckinghamshire, UK. ('95 DT)
Some people can get feeler guages in top and bottom on the switch and wobble it out. I couldn't.
5 screws or so. Doesn't take long. Instructions in RAVE. Side trims come out to expose 2 screws. The top and bottom part of the centre part then pull apart (pull down on lower part). One screw hidden behind the instrument binnacle or the close panel, cannot remember which.
5 screws or so. Doesn't take long. Instructions in RAVE. Side trims come out to expose 2 screws. The top and bottom part of the centre part then pull apart (pull down on lower part). One screw hidden behind the instrument binnacle or the close panel, cannot remember which.
Dragonwalker
Well-Known Member
- Posts
- 3,303
- Location
- Out the back
- Posts
- 58,170
- Location
- Preston Lancs.
- Posts
- 58,170
- Location
- Preston Lancs.
