P38A Glow Plug Relay, power in but no power out?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Andy Cash

New Member
Posts
5
Location
Wolverhampton
Hi Guys

I am having problems with my 1999 2.5 DSE glow plugs. There doesn't seem to be any power leaving the glow plug relay to the plugs themselves.

I have power going to the relay but that is as far as it gets.

I have also changed the Engine Coolant Temp Sensor (green one on side of black towards the back) as i read that this may cause a problem, but to no avail.

any suggestions or pointers for what i could try next would be gratefully received


many thanks

Andy
 
Hi Guys

I am having problems with my 1999 2.5 DSE glow plugs. There doesn't seem to be any power leaving the glow plug relay to the plugs themselves.

I have power going to the relay but that is as far as it gets.

I have also changed the Engine Coolant Temp Sensor (green one on side of black towards the back) as i read that this may cause a problem, but to no avail.

any suggestions or pointers for what i could try next would be gratefully received


many thanks

Andy

Have you checked the fuse (80 amp I think) in the engine ECU housing?

G~
 
Hi Saint.V8, thanks for the reply!

doesn't seem so, although I'm not an electrical wiz! is there an easy way to check? couldn't hear it clicking if thats any help? i did replace it for another but it was a used one, perhaps with the same problem?

regards

andy
 
well after changing the glow plug relay a couple of times for different units the problem is still there!! could do with a few pointers if anyone has any ideas where to start looking?
 
Back
Top