Gearbox Issues

1976 Land Rover · May 20, 2023

Hi, just thought I'd ask before pulling the box out. Planning on rebuilding my Gearbox it pops out of all gears on engine braking, and I can float gears don't even need clutch. What parts do you think I will need? 1976 series 3 109

Cheers

steve2286w · May 21, 2023

I would first check the main shaft nut is not loose and the detent springs and balls in place and working properly , however if you strip down you will need seals, gaskets, and possibly bearings and shafts depending on wear, are the selector shafts tight and is there movement on the engine/ gearbox mountings

1976 Land Rover · May 21, 2023

steve2286w said:
I would first check the main shaft nut is not loose and the detent springs and balls in place and working properly , however if you strip down you will need seals, gaskets, and possibly bearings and shafts depending on wear, are the selector shafts tight and is there movement on the engine/ gearbox mountings

All engine gear box rubber mounts are new so there should be no movement will check the main shaft but and other bits when I get a bit of free time. Cheers

Gearbox Issues

1976 Land Rover

Member

steve2286w

Well-Known Member

1976 Land Rover

Member

Similar threads