fuel line t juntions

quick questions guys?

I have a eberspacher heater i have to fit to my defender 110 td5, i was going to fit a t-junction into the fuel line, i know the eberspacher heater fuel line is 6mm but what size are the landy fuel lines.

2nd question, anyone know of a good source of fuel line t junctions online, tried evil bay and could only see ones from turkey.

3 question, there are 2 fuel lines running from the tank, which one do i break into, feed or return and how do i tell which is which...

COL

found some online suppliers of t pieces for the fuel line, the only info i need now is how thick in mm the 110 fuel line is and how do i tell which is the feed and which is the return line from the fuel filter.

Thanks for any help in advance.

shameless bump

coln18 said:

found some online suppliers of t pieces for the fuel line, the only info i need now is how thick in mm the 110 fuel line is and how do i tell which is the feed and which is the return line from the fuel filter.

Thanks for any help in advance.

Click to expand...

Follow the arrows!!

OSD

Thanks mate, will check that out tomorrow, just have to decide if i go for a t junction into the fuel line or try to fit the fuel standpipe from the eberspacher d2 kit directly into the fuel
tank.

What would you guys do, go for the t junction or try lowering the tank and drilling a hole into the fuel tank?

Any advice from anyone having done this job would be appreciated, by the way i have a 110 2004 td5.

Col