Front Fog Lights

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

ANDYLEIPER

New Member
Posts
29
Hi all just wondering i have 2.5dt p38 and wanted to put front fog lights on the bottom valance, saw some on flea bay but the add said they couldnt be fitted to p38 diesal, when i asked why the guy replied and said . that they effect the intercooler airflow and can do damage ,i have my doubts as the blanks are their anyway, any diesals out their with lower fog lights
thanks andy.
 
On 1 side of the lower valance should be a grill, with the other blanked (O/S i think). behind the grill is a small rad for cooling the gearbox oil (auto box). I have read other threads where lights have been fitted and then caused gearbox problems.

I personally wouldn't do it having read about the probs, but hey its your car
 
On 1 side of the lower valance should be a grill, with the other blanked (O/S i think). behind the grill is a small rad for cooling the gearbox oil (auto box). I have read other threads where lights have been fitted and then caused gearbox problems.

I personally wouldn't do it having read about the probs, but hey its your car

The answer may depend on whether or not you have a manual gearbox or auto. My P38 diesel is a manual and the gearbox cooler is in front of the main radiator (below the intercooler). As you say both apertures in the valence for foglights have blanks in them so I can't see that fitting foglights can have any effect on cooling a (manual) gearbox. Have you asked Land Rover - they should know! You may need some wiring loom as well.
Hope this helps,
mikeateves
 
As all above really.
Fog lights are a no no on Diesel auto models but OK on petrol auto models.
The gearbox oil cooler must be in a different place on petrol models.
 
Thanks for all your quick replies and help, I will go get them now ,another job for the weekend' thanks once again. This is definetaly the best place for honest advice and help.
ANDY
 
Have you got the wiring loom already in place??? As you may need to order this as well if you dont have the loom pre-installed.

-Wills :)
 
I dont have the loom in at the moment i will put one in via a relay to the switch.
many thanks.

while on the subject of jobs has anyone got a black leather and wood effect steering wheel for sale i always fancied one of them for my RR

regards ANDY;)
 
Back
Top