Disco 2 Front bumper cracked
- Thread starter MJI
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Anaconda
Well-Known Member
- Posts
- 3,425
- Location
- Thames Valley
Get it plastic welded or try and find a decent 2nd hand one I guess.
Interceptorxj
Well-Known Member
- Posts
- 1,714
- Location
- Bolton, Greater Manchester.
I just used a soldering iron to weld mine back together.
1988smithy
Well-Known Member
- Posts
- 4,041
- Location
- West midlands
I got a cheap plastic welding gun off amazon to fix a crack in me caravan, worked well
Edit
It was ebay
You can melt cable ties if you need to add material
Edit
It was ebay
Hot Stapler Plastic Repair Car Bumper Welding Welder Machine Kit +200 Staples UK | eBay
Heating/cooling is faster, more effective and energy-saving than general welding machines. 1 x Plastic Welding Machine. Staples weld into the plastic quick and easily. Thermal cutting. It can be used for hot cutting of plastic rope,flat cutting and automatic sealing.
www.ebay.co.uk
You can melt cable ties if you need to add material
- Posts
- 44,585
- Location
- East Dorset
If you dig through "Wheeler Dealers" there is at leasy one brill one where they show you how to fix quite extensive damage.
My front bumper has needed repair ever since the previous owner drove it over a tree stump.
Still need to get a round tooit.
My front bumper has needed repair ever since the previous owner drove it over a tree stump.
Still need to get a round tooit.
1988smithy
Well-Known Member
- Posts
- 4,041
- Location
- West midlands
Good luck, if it doesn't work you aint lost anything 
- Posts
- 44,585
- Location
- East Dorset
frostythor
Well-Known Member
- Posts
- 608
- Location
- NEW FOREST
I had colour coded gaffer tape on mine for years until a minor bump, shatered it, not worth repairing as it was so brittle, so I opted for a 5mm steel one, if yours did the same its just years of sun damage, well Ivery happy with this one
I do need to find my black roll for now.
Boss wanted me in work today but as I pranged after a day in the office, AFTER getting a lift home, working remotely as normal. If he wants to golf after work I will WFH.
Sue does not want to spend a day in our office.
I only drove as we had to take dog to vets, normally I will not drive if at all fatigued due to safety.
Boss wanted me in work today but as I pranged after a day in the office, AFTER getting a lift home, working remotely as normal. If he wants to golf after work I will WFH.
Sue does not want to spend a day in our office.
I only drove as we had to take dog to vets, normally I will not drive if at all fatigued due to safety.
- Posts
- 2,061
- Location
- Hertfordshire
When I got mine the o/s fog lamp was broken along with the bumper so I took the bumper to a local body shop who built up/plastic welded & reinforced that area & for £50 did a splendid job leaving me to just add a replacement lamp off flea bay.
Attachments
- Posts
- 44,585
- Location
- East Dorset
Amazingly that it extremely close to where the damage on mine is. The fog lamp remained mearly intact.
Your pics show what can be done!
£50 very well spent!!
trackfrower
New Member
- Posts
- 3
Go steel. This also raises the fog lights
