Freelander Tyre Feathering / Sawtooth Pattern

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

DefUnct

New Member
Posts
239
Location
London
Hi chaps,

was looking around the site for a decent pic of what tyre feathering / sawtooth patterns on the rear wheels look like and could only find one - which still didn't help me much :eek:

Anyone got a pic of this, in easily visible form? Or is able to describe exactly what to look out for? (ie inside edge or outside edge etc)

Much appreciated :)
 
wheelalignment4.jpg


If the tread is smooth in one direction, but jagged in the other you have what is called a "saw-tooth" wear pattern

this can be either across the tyre or, more usual around the tyre and can be on the inside (as mine) the outside or all across the tyre.
 
Call a dealer and ask them as i think its a fault caused by the rear diff not fully sure. my old man had a problem like it and Land Rover knew all about it and changed the rear diff i think and it solved it.
 
I have some saw tooth around the outer section, my VCU, rear diff and IRD are all spot on.


all down to camber setup and tyre wall, Goodyear wranglers suffer badly
 
hi guys im a tyre fitter so i see this a lot, also my brother has had a freelander td4 for about 18 months and had this problem,
its quite simple but costly, it is the propshaft knackered (well the centre bit, the big round bit), a new one will set you back around 400-500quid but you can pick up good second hand ones for around £250, or if you are not using 4wd (offroad) you can simply take off the propshaft (so it is 2wd) and it will add around 20% to your fuel ecomony plus they actually drive better lol
i hope i was of some help
 
thanks for all the answers, i had a look today and didn't notice anything similar on either of my wheels, but at least i know what to look out for now.

merry Christmas to all :)
 
Back
Top