fitting a snorkel
- Thread starter seg
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Karlos28
Well-Known Member
- Posts
- 1,894
- Location
- Derbyshire
Are you sure it isn't on the side of the left wing??
Litch
Well-Known Member
- Posts
- 2,235
- Location
- Oxfordshire
A genuine 200TDi has the air intake on the side of the NS wing, the intake on the top of the NS wing is for the heater.
Most snorkels for the 200TDi connect to the intake on the side of the wing, for earlier models (2.5NA D & TD) a hole is cut into the top of the wing and for retrofit 200TDi it just depends on what airbox arrangement was fitted.
Most snorkels for the 200TDi connect to the intake on the side of the wing, for earlier models (2.5NA D & TD) a hole is cut into the top of the wing and for retrofit 200TDi it just depends on what airbox arrangement was fitted.
Karlos28
Well-Known Member
- Posts
- 1,894
- Location
- Derbyshire
My td is on the side...
landroverjack
New Member
- Posts
- 3,282
- Location
- NW Scotland
So is there just a hole in the bottom of your air box?
Litch
Well-Known Member
- Posts
- 2,235
- Location
- Oxfordshire
Sounds like they just used the NA airbox on the conversion. In standard set-up the intake tube pointed to the area behind the NS headlamp if I recall correctly as that way it wasn't drawing air in directly through the grill.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Military N/A's have the heater intake redirected to a series wingvent on the front of the wing and the heater vent on top of the wing is used to house the snorkel intake.
Litch
Well-Known Member
- Posts
- 2,235
- Location
- Oxfordshire
Military N/A's have the heater intake redirected to a series wingvent on the front of the wing and the heater vent on top of the wing is used to house the snorkel intake.
In your own words, bull****!
MOD NA D's converted for wading have that setup but the vast majority have the normal setup of heater intake on the top of the wing and air intake under the bonnet.
So I got the bit wrong about TD's??? You got the bit wrong about MOD NA D's (you should have put SOME) so quits!
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
In your own words, bull****!
MOD NA D's converted for wading have that setup but the vast majority have the normal setup of heater intake on the top of the wing and air intake under the bonnet.
So I got the bit wrong about TD's??? You got the bit wrong about MOD NA D's (you should have put SOME) so quits!
Another ****!! with OCD. of course it only applies to mod N/A's that have a snorkel fitted. It'd be a bit hard to fit a snorkel to a landy that hasn't been converted toi wading??
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Been taking lessons in dummy spitting and lip wobbling from you..
A long way to go my young apprentice
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
A long way to go my young apprentice
Yes Master!!
Dummy in
Dummy out
Dummy in
Dummy out!!
landroverjack
New Member
- Posts
- 3,282
- Location
- NW Scotland
Haha seg, clearly you didn't realise what you were signing up for
Btw, fit the snorkel before you learn it the hard way like me:doh:
Btw, fit the snorkel before you learn it the hard way like me
:doh: