Expansion Tank Overflow Hose

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

MARKMAC

Member
Posts
24
Hi

Please don't laugh! but where does the the overflow hose that comes out of the neck of the metal expansion tank on a 2.5 Turbo Diesel 90 go (Part No 564724) on the parts diagram I have it just shows it connected to tank not where the other end goes. Take it has to go somewhere as the system needs to be sealed.

Mark
 
Hi

Please don't laugh! but where does the the overflow hose that comes out of the neck of the metal expansion tank on a 2.5 Turbo Diesel 90 go (Part No 564724) on the parts diagram I have it just shows it connected to tank not where the other end goes. Take it has to go somewhere as the system needs to be sealed.

Mark

Just kind of drips down the inner wing, and then runs onto the road. You shouldnt get much out of it, it is only for if you overfill it! :)
 
Should just come out the back of the expansion tank at the top, then drop down behind and loop around so the end points vaguely upwards. In normal use the filler cap will seal the system- it's only if it opens under excess pressure that there will be anything in the overflow pipe.
 
Hi

Cheers for that.

Been 7 years since I pulled it apart, wee bit foggy about where things are meant to go, so probably lookout for more dumb questions.

Thank God for forums
 
Back
Top