Esr414

Been trying to find this part which is a 200tdi intermediate exhaust bracket for the 110 (the one attatched to the gearbox) but it has been discontinued and I cant find one anywhere. Any one know if there is another part number I can use?

I would presume its the same as a 90,is it the one that has two bolts going up into the box? I tried finding one but had no luck. It had snapped in 2 so I took both bits to an engineers and they made up a new one for a tenner, probably cheaper than buying one. Hope this helps

yep thats the one. Thinking i might have to get one made up too.

ive got quite a few good used ones if you get stuck ,would only cost postage ,i normally scrap them

Had a look at my mates 90 300tdi and he has a bracket welded to the chassis for his intermediate exhaust so I guess its got to be from a 110.

bracket same for 90 110 300 different from 200

Ah nice one will send you PM

Hello James,
I know its over a year since you posted the response but have you still got any ESR414exhaust brackets please - i.e. the one that bolts to the rear of the gearbox. I have hunted all over the place and not been able to find one.
If you will be prepared to sell me one I shall be very grateful. I have just finished replacing the exhaust system on my 300 TDi 90 and don't want that to break for the lack of the final bracket.
My Email address is [email protected].
Many thanks, Basil