Engine hoist

Hello,
Would anyone like the attached engine hoist for free, obviously the person who wants it will need to collect it

Area Warrington Cheshire

wheredgalive?

he lives near me, nd im fetchin it on sat, get a feckin sold sticker on it

Can't put a SOLD sticker on it as it's FREE

well write, "yella's" on it and pm me yer addy

lrfc said:

Hello,
Would anyone like the attached engine hoist for free, obviously the person who wants it will need to collect it

Area Warrington Cheshire

Click to expand...

I've got one exactly like that.
Great kit.
It even steers, points the front wheels where the handle is aimed, so if y'ask Riggaz nicely he'll tell you that you need to get the tracking set at a dealer garage, and of course be sure to use the most expensive (highest profit margin) snake oil additives in the hydraulic oil.

A great addition is a engine hoist leveller from MachineMart. When slipping in Landy engines one of these really REALLY helps when you are aiming the GB input shaft up your flywheel.

I used to have another one, but I mean, how many engine cranes does on man need?

CharlesY

aye thats right rupert, i think you'll find ive got one like that now,

the garage where i did me apprenticeship had one like that i now have a 2ton folding crane that'll lift a daimler ironblock V8 and autobox 6foot in the air with ease(maximum extention)

its mine yer bastads now stay away!

Sorry everyone Yella Fella has got it

ah want a comission, it wur we wot put him on to it

went and collected the said item this morning, nice chap, even provided refreshments after loading thhe great heavy bastard onto the trailer, got it home only to find yer man had kept the handle ter pump it up, he was a scouser after all

Nah, we tol' him to keep it. Made us larf.

tis ok, ive got a spare bar at home

yella said:

its mine yer bastads now stay away!

Click to expand...

I hear he sits up at nights guarding it ....

we should have a whip-round to buy him a Machine Mart engine leveller.

You winds the little handle and the arse end of the engine tips gently down, and you aim the GB input shaft ever so carefully at the clutch cover, and you gives her a little wiggle, and in she pops .....

Everyone with an engine crane needs one of those.

Does anyone know if a typical Landy engine and transmission complete can be taken out and in, all in one piece?

CharlesY

CharlesY said:

I hear he sits up at nights guarding it ....

we should have a whip-round to buy him a Machine Mart engine leveller.

You winds the little handle and the arse end of the engine tips gently down, and you aim the GB input shaft ever so carefully at the clutch cover, and you gives her a little wiggle, and in she pops .....

Everyone with an engine crane needs one of those.

Does anyone know if a typical Landy engine and transmission complete can be taken out and in, all in one piece?

CharlesY

Click to expand...

Series 2 & 3 can.