Electric seats in 3 door

I am going to put rear seats in my discovery 1 commercial. I know of a complete electric leather interior from a 5 door. Can anybody tell me if it will fit and how much work is involved.

front seats yes easy 4 bolts per seat then whatever electrical cabling...rear seats, think there all same, so 4 bolts and job done, seat belts however, not sure if commercvials have the chassis mounts ready for them

The simple answer is no cos the front seat bases are different cos this is how they tilt to allow you into the back.. where as on the five door the bases are fixed plus the have different bolt centers. having said this it is possible to make up some brackets to make them fit using some flat bar but you will end up sitting slightly higher in the cab plus finally its unlikely you will have the wiring in a commercial for the seats so you would either have to make your own or get the loom from the other vehicle. as for the back seats then yep but you will need the lock plats for the seat backs plus the seat belts and the anchorages but all the mounts should be there

Thanks I will just get some back seats and belts or find a 3 door interior good point on the locks