EGR Pipe

It sounds like my egr pipe has got a hole in it at the corrogated section, I've not removed it yet as I've just found that's where it's leaking from, where does the other of this pipe go, how hard is it to replace and where's the best place to get a replacement pipe from?

I have a 04 plate SE TD4

Thanks in advance for any help.

at the corrogated section

Click to expand...

?????

post pic ..

i.e. solid pipe or flexible hose ? ..
the exhaust pipe inlet to to the egr valve unit ?
or .. the primary air intake section .. pre air filter

I think it's called the egr pipe, it's the metal pipe that feeds the exhaust gas into the egr valve.

I fitted the egr bypass but the length of the part that comes off the main body of the bypass that the egr pipe clamps onto was to short so I cut it so that I could blank off the egr pipe and have the bypass fitted.

I intended on cutting a bit of metal and welding it on so that it was the correct length and the egr pipe was supported but due to getting this friggin cold and sore thoat and the rain I haven't had the chance hence the vibration has fractured the metal egr pipe and it sounds like there's a hole in the exhaust in the engine bay when I press the accelerator.

Easy to describe because I know the part I mean but not easy for you guys to picture it. I've only got my tablet pc just now and not got any pics on it at all.