sidewaysste
Active Member
- Posts
- 715
- Location
- Nottingham
I've stuck a 4.6 Gems in my D1 manual. I've got her running but she's not firing on all 8 all the time and she's overfuelling a lot. With my Scantool I can read that one O2 sensor(possibly trim, the scantool doesn't specify) is pulling -5% whilst the other is adding +15%. Suggests to me that I have an air leak into the exhaust but strangely when I disconnect the O2 sensors I dont get any DTCs.
Just both banks adding 24%
I've also noticed that closed throttle is 12.5% and WOT is 95%. I assume I need nanocom to reset this?
Just both banks adding 24%
I've also noticed that closed throttle is 12.5% and WOT is 95%. I assume I need nanocom to reset this?
