disco 1 200tdi , 2 inch body lift

right ive done loads of reserch on this but cant find a straight anser anywhere , ive brought a 2 inch body lift kit off ebay this morning (just the blocks and bolts ) i emaild the seller and askd him if i needed anything else with this kit and he just said i just need the seatbelt anchors , is that true ? can i get away with out using the radiator pins ? rear floor spacers i can just make , can i get away without using the gear shifter add on ?
the truck has also already got a 2 inch suspension lift
thanks tim

My understanding is that with the two inch lift you do need the radiator pins.

Although there is enough meat on the steering mechanism I would personally use the gearlever extension and the seat anchors. Both are cheap enough and make for a standard feel (gearlever) and greater safety (seat belt anchor).

GreenHornet said:

My understanding is that with the two inch lift you do need the radiator pins.

Although there is enough meat on the steering mechanism I would personally use the gearlever extension and the seat anchors. Both are cheap enough and make for a standard feel (gearlever) and greater safety (seat belt anchor).

Click to expand...

cheers for the reply , i think i will just buy the other bits then , like you said they are only cheap ,

thanks alot
tim

I am thinking about a body lift, but keep wondering how easy it is on a 300TDI disco

Big Stu 12 said:

I am thinking about a body lift, but keep wondering how easy it is on a 300TDI disco

Click to expand...

its not going to be a hard job , look on here Body Lifts for every Marque - Full Range of Body Lift Kits - Quality from Xpajun Off-Road they sell complete kits and ther is a good write up on how to fit it and what is needed , as long as you stay 2inch and under it is ment to be straight forward

atb tim