vdubdude2110
New Member
- Posts
- 9
Hi can anyone give me any advice on rear diff mounts. Just about to change mine and was wondering if the after-market ones (Britpart etc) are any good or does it pay to get genuine Landrover?
diff mounts
- Thread starter vdubdude2110
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
rhodie
Active Member
- Posts
- 722
- Location
- hemel hempstead herts
get oem part or you will be doing it again and again mate
freelance
Well-Known Member
- Posts
- 8,467
- Location
- essex and beyond
gen lr every time!!
Barry6690
Active Member
- Posts
- 183
- Location
- Tow Law, County Durham
A mate of mine and myself have replaced our mounts ( 2 vehs) with these.
Flo-Flex Polyurethane Limited
you have to get the old bushes pressed out and the new ones pressed in, or you can buy the complete kits, expensive but very good and last forever.
Flo-Flex Polyurethane Limited
you have to get the old bushes pressed out and the new ones pressed in, or you can buy the complete kits, expensive but very good and last forever.
Last edited:
MULDERKE
Well-Known Member
- Posts
- 697
- Location
- No Mans Land
As it goes, i'm very interested in these replacement bushs.
Are they made of a solid type plastic/ Nylon or do they have some flex in them?
Diesel Do
Well-Known Member
- Posts
- 5,212
- Location
- Nottingham
Just done mine
My rear two were the worst, guess the front had been done at some point. Mine were flo flex off eBay. Great service and fast delivery and communication. They are more expensive but looking at them I suspect it's a one time only fix rather than the rubber ones. Mine gets a pasting off road so wanted to make it reliable! As far as I know they're polyurethane.
My rear two were the worst, guess the front had been done at some point. Mine were flo flex off eBay. Great service and fast delivery and communication. They are more expensive but looking at them I suspect it's a one time only fix
rather than the rubber ones. Mine gets a pasting off road so wanted to make it reliable! As far as I know they're polyurethane.
MULDERKE
Well-Known Member
- Posts
- 697
- Location
- No Mans Land
Just done mine
View attachment 33308View attachment 33309
View attachment 33310View attachment 33311
My rear two were the worst, guess the front had been done at some point. Mine were flo flex off eBay. Great service and fast delivery and communication. They are more expensive but looking at them I suspect it's a one time only fix
So. Are they solid?
Diesel Do
Well-Known Member
- Posts
- 5,212
- Location
- Nottingham
There is a bit of give in them but not much
Diesel Do
Well-Known Member
- Posts
- 5,212
- Location
- Nottingham
Quick update! Done a whole 30 miles in it the orrible thudding noise from the rear has gone completely, going greenlaning tomorrow for a proper test.
the orrible thudding noise from the rear has gone completely, going greenlaning tomorrow for a proper test.
