Diff lock on 300tdi

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I use M4 countersink pan heads with M4 rivnuts and washers, I brought a cheap rivnut gun from a local screw shop, and it does the odd job well. think it cost about £13 and I buy the rivenuts when i need some the size i want look inthe yellow pages for fastner suppliers.
 
Well, today didnt go well! was on my own so was quite hard to move the rods from under the car at the same time as spraying penetrating lubricant. undid the centre console bolts and also the hand brake locking pin type thing but bouldnt manouevre the console over the hand brake! freeezing cold now and covered in crap .. and still no diff lock! :(
 
just push away from yourself when sat in drivers seat you can be in low high or N, just done mine again & i have taken the top off 6 months ago oiled it all & I use it all the time, this time I just went under & sprayed with WD but when they stick under lack of use, they are very stuck. have fun.
 
Rich-300tdi said:
Well, today didnt go well! was on my own so was quite hard to move the rods from under the car at the same time as spraying penetrating lubricant. undid the centre console bolts and also the hand brake locking pin type thing but bouldnt manouevre the console over the hand brake! freeezing cold now and covered in crap .. and still no diff lock! :(
Click to expand...

You have to lift the habdbrake up to the vertical position to get the console off. You did undo the 5th screw holding the console? Just under the handbrake ratchet.
When I put my console back I drilled new holes in the metal surround and self tapped it into place so that it can be easily removed next time.
 
thanks for all the advice guys, im going to try again on tuesday my next day off! will try get some one to help as i find it really hard underneath to see which linkage rod to spray and i can can only get to the front part from there, oh.. and il look for the 5th console screw this time too! lol
 
take the consol out to access the lever box and free the rod that goes from side to side, i had to use a big hammer and plenty of grunt to free mine but well worth it.
 
You must log in or register to reply here.

Similar threads

Christhevanman5
Discovery 2 dill lock light
Replies
2
Views
242
Christhevanman5
Christhevanman5
Paj90
Diff lock won't engage
Replies
3
Views
442
dag019
dag019
R
diff lock problem
Replies
13
Views
775
Stanleysteamer
Stanleysteamer
new to all this
D2 Central locking not locking.
Replies
11
Views
685
sierrafery
sierrafery
RustyDefender
Diff lock 0 power
Replies
15
Views
1K
RustyDefender
RustyDefender
Back
Top