Defenderer 110 seat options

Is it possible to fit the rear seats from a 2000 D2 in the rear of a CSW. Asking for a mate?

Anything is possible with a Defender, but you'd need to fabricate mountings etc and it wouldn't be straightforward.

Also, are you meaning replacing the second row seats in a 110, or rear forward facing seats from a Puma 90, or rear side facing seats from a TD5 90?

lightning said:

Anything is possible with a Defender, but you'd need to fabricate mountings etc and it wouldn't be straightforward.

Also, are you meaning replacing the second row seats in a 110, or rear forward facing seats from a Puma 90, or rear side facing seats from a TD5 90?

Click to expand...

There is this chap selling a set of grey and mint Disco 2 rear seats in leather for lemonade money. If they would fit width ways they’d be a game changer?
Same as these but immaculate and slightly darker.
…yep 2nd row in a 110 CSW

As well as width, you'd need to check depth as the second row seats in a 110 are fairly narrow front to back compared to most.

Also those Discovery seats have a big cut out at both ends and it might look a bit odd in a Defender.

You'd likely be the first one to try it so you could report back if you fit them with some photos!

lightning said:

You'd likely be the first one to try it so you could report back if you fit them with some photos!

Click to expand...

Really?

Take the current seats out and ask the seller if you can try fitting them in the back before you buy, if that’s an option?

D2 seats are locked upright at the top left & right corners on to the body. Finding a way to do this could be a problem

I briefly looked in the back today and the D2 seats would have to sit well behind ‘c’ pillar. I have ducks back covers on the existing rears so I think it’s a job that doesn’t need doing. Just £50 for immaculate leather seats is a steal.

What seats did @bankz5152 put in his?

doriz said:

I briefly looked in the back today and the D2 seats would have to sit well behind ‘c’ pillar. I have ducks back covers on the existing rears so I think it’s a job that doesn’t need doing. Just £50 for immaculate leather seats is a steal.

Click to expand...

I haven’t looked into it properly [at all], but I thought about fitting front seats into the back row. Far more secure than the folding ones currently fitted and with the added luxury of being reclining! Not the answer you’re looking for, but might be worth investigating (for my benefit).

doriz said:

I briefly looked in the back today and the D2 seats would have to sit well behind ‘c’ pillar. I have ducks back covers on the existing rears so I think it’s a job that doesn’t need doing. Just £50 for immaculate leather seats is a steal.

Click to expand...

New furniture for the shed?

doriz said:

Really?

Click to expand...

Yes, l've never seen or heard of anyone fitting Disco rear seats in a 110, and l've been on this forum (plus other Land Rover forums) since 2006

With a welder and some skill can put what you like it.

I fitted 2017 RR Sport seats in my DCPU. A tight fit but very comfy, however not great if youre over 6ft

bankz5152 said:

With a welder and some skill can put what you like it.

I fitted 2017 RR Sport seats in my DCPU. A tight fit but very comfy, however not great if youre over 6ft

View attachment 241646

Click to expand...

That looks like business class on a 747. Have you posted the right image Nice work as always @bankz5152

Good work, that's a bit of an improvement over the standard bench seat.

l've never flown business class
on a 747 so l wouldn't know how it compares, although l have flown on the flight deck of Boeing 737 in the jump seat, which was about the same as a standard Defender side facing rear seat.

Thanks! Better with the slide out fridge too!

Standard front seats fit too

Novice question - where do you stand fitting different seats insurance wise. Do I have to use the existing seatbelt anchors, or if in the case of the D2 rears can the integrals be made default?

I stripped out the rear interior windows shrouds and dog guard yesterday so I can replace the body seal (leaking ) which left the rear bench seats flapping round like spaniels ears. I either need to get a better replacement or weld up those pathetic fold down catches which have all broken loose.

bankz5152 said:

With a welder and some skill can put what you like it.

I fitted 2017 RR Sport seats in my DCPU. A tight fit but very comfy, however not great if youre over 6ft

View attachment 241646

Click to expand...

Love this! I've been wanting to do fit some new rear seats in my 110 for a while also. Hadn't considered RRS.
Has anyone tried Freelander 2's or P38s? Obviously theres ex moor trims but I'm not made of money.