defender csw rear bulkhead

hi after abit of advice. Im thinking about changing my van back defender to a truck cab. Only problem is that i have a csw rear tub which i replaced a couple of years ago. The rear bulkhead slopes down in the middle. The problem is when i come to bolt the rear of the cab to the rear bulkhead it wont meet up because it sits lower. Is their a replacement bulkhead panel i can put in. Cheers andy

Ive still got my old tub with the correct rear bulkhead in. Can i swap the two bulkheads?

There isnt a bulkhesd on a few 110?
U may need a filler plate to fill the gap between rear panel and the bulkhead on yr hardtop rear tub
I know u did on series motors

Just buy a truck cab roof and rear panel then bolt to yr exiting tub

It's the rear panel that won't fit because the bulkhead slopes down. I'll a picture

Here's another picture of the rear bulkhead

I am in the process of doing this now... I have brought a roof and window... I now need to buy that bulkhead(full one not half like yours £100) and rear tub top capping (£60 each)

d8moa said:

I am in the process of doing this now... I have brought a roof and window... I now need to buy that bulkhead(full one not half like yours £100) and rear tub top capping (£60 each)

Click to expand...

Hi mate were abouts are you getting the cappings and bulkhead from

Spartan117 said:

Hi mate were abouts are you getting the cappings and bulkhead from

Click to expand...

Main dealer fella

Not seen a bulkhead like that before

I'm about to swap my csw roof and cappings for ones which I've refurbished. The lining will also b for sale. Also have a pair of one piece cappings but one needs some welding.

I lied in a previous post... well I didn't lie landrover ####ed up!!
I have just brought the rear tub top caps for £185 Inc vat from the dealers!
They want £300 Inc vat for the tub bulkhead part which I'm not prepaired to pay! It can be easily made with sheet metal or you can do what I'm trying to do which is buy one from a 90 as there more readily available and modify it to fit my 110

It looks like someone in the past has cut it down and fitted one of those bulkhead removal kits - that's how it looks like it's got a factory finished edge to it. So it looks like a replacement bulkhead panel is needed. Unless you can fabricate your own filler panel.

Image from http://www.mudstuff.co.uk/media/wysiwyg/100_0507.JPG.

I agree bulkhead removal bar as per link



Sent from my iPhone

Well spotted. Looks very like the Mudstuff offering.