Defender 90 Front Door Screws Needed!

Hi guys as some of you know i drive a defender 90 1995 300tdi.
I recently had the seals around my doors replaced and some of the screws which attach the door card to the door have either seized or threaded. However i cannot find any where to get these screws from only a full set including a door. Can anyone help?
I also need a hinge for a door as it has dropped.
Many thanks!

Bump!

FFS get some self tapping screws. as for the hginge. Ebay for the fooker!!

What size though?

JJbing said:

What size though?

Click to expand...

one's that'll fit stick a drill bit in the hole if it fits that's the size you need.

Jeesus can you not think of anything without someone holding ya hand :Confused:

redhand said:

one's that'll fit stick a drill bit in the hole if it fits that's the size you need.

Jeesus can you not think of anything without someone holding ya hand :Confused:

Click to expand...

Yes i can, would just like to confirm i am getting the correct things.
I obviously don't have the experience that you have as i am young...

well why the fook doin't ya say so..

i think it was obvious. the hint by my name says "junior member"

You are only a junior member because you have 26 posts :doh:

im a junior in general and new to land rovers ! duh!

Well then, Junior General,

All you have to do is tootle off to your local Motorists Do-It-Yourself store and pick up a packet of small self-tapping screws, (black is usually quite a good colour for them), go to the pay desk and give them enough money in exchange for them.

When you get home, ask daddy if he will show you how to use a crosshead screwdriver to insert each of the little screwy things into the waiting orifii (that's plural for orifice, in case you didn't know), whilst rotating them in a clockwise direction. You can turn them as often as you like until they don't want to turn any more. That generally means that they are tight enough.

As for the hinge ... Don't be so FN idle and check on fleabay!!