TalkTorque
Member
- Posts
- 11
Long time lurker, competent searcher, learnt a lot (thanks, everyone) but now baffled.
Disco doesn't fire on at least one cylinder after a totally cold start. Misfire remains no matter how hot the engine gets - provided I don't switch it off.
BUT... if I switch off and restart it once it's warm, it runs normally! It only needs to be lukewarm for this to work - about 2 gentle miles is all it takes.
I've got very limited mechanical skills/facilities (and no Hawkeye/Nanocom). First off, checked for oil at the ECU: perfectly clean and dry. Second off: this post!
Any clues welcome.
And if anyone can recommend an independent in the Aberystwyth area, that would also be very welcome.
Disco doesn't fire on at least one cylinder after a totally cold start. Misfire remains no matter how hot the engine gets - provided I don't switch it off.
BUT... if I switch off and restart it once it's warm, it runs normally! It only needs to be lukewarm for this to work - about 2 gentle miles is all it takes.
I've got very limited mechanical skills/facilities (and no Hawkeye/Nanocom). First off, checked for oil at the ECU: perfectly clean and dry. Second off: this post!
Any clues welcome.
And if anyone can recommend an independent in the Aberystwyth area, that would also be very welcome.
