The windows not set message is normal after a battery disconnect, it does not affect the tutorial.I find out the extra wires or broken wires of the BeCM, in which connectors they are. One more note, due to multiple battery disconnects, the car's message center says: settings windows, sunroof etc, does this affect the tutorial?
Yes, but only if the ECU has had the immobilisation disabled.I'll check later today. I saw an article on some site, someone had tested the motor on the floor connecting 4 ground wires -. then connected 2 power cables +. The engine had started. When installed in a car, no. It is probably about connector C509, pins 5, 9, 10 and 16 are grounded and 7 and 8 are positive pins. This might be worth looking into??
No, the ECM and the BECM have to be the same.Just a thought: Can the ECM teach in another car and then bring it to work in my car?
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!