Busy weekend ahead,whats your plans?

Right hopefully weather plays the game and stays dry

Got some new Hd front springs. Undecided to either drop them out or remove turret and change with shock out the way.

Got a new l/h half shaft for rear axle. Ex-mod from ebay. Cheers easy. Got new drive flanges an all. Hopefully take out some backlash. (Just need right hand half shaft now)

An as my slidding rear windows leak and rattle..some new felt runnets from woolies........gonna be busy hope it stays dry and family dinna need me......

What you lot all up to wea your wagons?

Sorting out diff switch issue

Clean the 90 tomorrow then a 600 mile round trip Sunday to pick up more parts for my other car

Fit my new doors, clutch master cylinder and new front discs and pads hopefully.

Just had a day doing some fab lanes in the Peak District so washing all the crap off the sides and checking the clunking noise that started earlier on

New Steering box in this weekend with any luck, hasnt moved for the best part of a month now

Working

Bit of welding on the doner Disco axle, plates for the spring retainers and check radius arm brackets.
Callipers are well rusted and I fear I may struggle getting the bolts out, will need lots of heat and hammering.

Looking like new callipers and discs etc will be going on in time

Pick up trailer in morning and bring the wife's clio to a vehicle tech to try and sort out auto gearbox problem. Then go and pick up wife's Honda with knackered cvt gearbox and think about burning it. Then if I've got time find out why the fuse blows when i select reverse leaving me with no reverse light and wipers . Pain in the ass removing fuse everytime i have to select reverse in the 110.

Hopefully getting my front axle painted and rebuilt. Maybe even fitted if all goes well

Well get to pick mine up this weekend so will have to start a restore thread once work commences

Finish sorting out the alternator, change the oil and give it a good clean out before filling it up with stuff to take to the tip

hall stairs and laning 50% painted just long wall to do tomorrow, daughters bedroom underlay down just laminate to put down. then teach the russians how to drink vodka

Get the shopping done nice and early, fit the storage heater in the kitchen, find out why the washing machine floods randomly, tidy up round outside of house and take to dump, buy the right bolts for the tratter suspension this time, then maybe just maybe I'll get some time in the garage which will include fitting of rear suspension upper arms, bump stops but will have to make some special bracket due to my "different" rear chassis setup and hopefully get on to stripping the front axle.

600 mile rpund trip to pick up my new 110 tdi

front suspension too!

Relaxing as my 1990 110 went through the MOT with no advisorys, so treating it to two new outer rubber window seals, which should take me about 5 minutes.

Fitting boost alloys putting my 265 insa turbos on them and maybe a polybush set

Its sunny in north Yorkshire ??

So cracking on wea the beast, an woke up to find a wet drivers foot well again....after changing all the bulkhead seals.....gonna get the hose out and sit in the thing whilst the wife or boy soaks the thing to try an plug this leak!

Sunshine down here in Middle England, so trying to dry the insides out after all the rain and subsequent wading action......