Brake pedal switch. 300TDI auto.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Maurand

Active Member
Posts
156
Location
Wiltshire
Hi,
Yesterday out shopping all fine. I went back to the parked car the brake lights were on and also the ABS light on the dash was still on when driven.
The switch was really goosed, just over 6 months old, the plunger stuck in so ordered a new one from Paddocks which arrived this morning. Fitted that and the lights are still on, seems as though the pedal isn't coming back far enough or the switch plunger isn't sticking out of the switch far enough the two are not making contact with each other.
If I operate the switch by hand the lights go on and off but just parked up lights are full on. Are there any ideas you could please offer. The car is a 1998 300TDI auto. Thanks for reading.
 
Found it I hope, a piece of wadding/insulation has trapped the pedal stopping it come back fully. Hope that's all. Thanks anyway
 
Back
Top