bobtail or not...

Whereabouts in Notts are you dave?

i'm in newstead mate, where are you?

Hucknall...

As said plenty of pics, whats your time scale?

easter!...with lots of luck...

hoping to take it up to kirton lindsay, bank holiday weekend...

all set for taking 'DEEFER' to a mates for the surgery...wish me luck peeps!!..

Chop CHOP!!!!

its quite surprising how much you can get done in a couple of hours in a car-port, between the 2 of us doing it...
PICS TO FOLLOW LATER.....#HALFATRUCK...LOL...

my pics are here...discodave71's Library | Photobucket

still not sure how to upload them on here...

Wow theres some rot in there,
to up load the pics so they show on here you need to copy the img code and paste it here

cheers for the photo's....

i keep getting told to scrap it, but that aint going to happen...

if you click on the pic so they go big you can copy the IMG code or copy the IMG when they're thumbnails

Photobucket have ****ed up the site used to be able to click all the ones you wanted in one go and it'd make a code in one go for you to copy all

is off bobtailing...getting to the stage where i have to really think about it, as i took off 1" more than i wanted..... but hey-ho, onwards and upwards...

if all fails theres always the tray back option

took just shy of 400mm or about 15;1/2 inches, looking pretty good i think...

dont worry if youv taken too much off you can always weld bits back on!

aslong as the chassis is alright youv only got the body to repair, check the sills and the inner front arches as there likely to be in a bad way if the boot floor is as bad as that.

dont give up hope its gonna be worth it in the end mate

discodave71 said:

took just shy of 400mm or about 15;1/2 inches, looking pretty good i think...

Click to expand...

C'mon more pics


Have you kept the bit of metal from the gutter to the roof window? as I'm after a bit to repair mine with

already done the sills,boot floor and inner wheel arches, decided to 'bob' it when i got to the back end, just passenger side rear wheel arch to sort...

@matt, yes mate i will sort you a piece out, back on it later so i'll get it then, and more pics as the back end is nearly ready to go back on...