mikeateves
New Member
- Posts
- 124
Hi,
I need to bleed the brakes on my P38A DT and I'd appreciate some clarification of the instruction for doing the rear calipers. The instructions say:
16. Bleed each of rear calipers, starting with driver's side caliper first, then repeating steps 16 to 18 for rear passenger side caliper.
Open the bleed screw.
Depress brake pedal slowly and progressively.
17. Switch ignition ON ( so pump starts to run ) for 4 seconds
etc.
Does this mean switch on ignition while depressing the brake pedal or once the pedal is fully depressed?
TIA,
mikeateves
I need to bleed the brakes on my P38A DT and I'd appreciate some clarification of the instruction for doing the rear calipers. The instructions say:
16. Bleed each of rear calipers, starting with driver's side caliper first, then repeating steps 16 to 18 for rear passenger side caliper.
Open the bleed screw.
Depress brake pedal slowly and progressively.
17. Switch ignition ON ( so pump starts to run ) for 4 seconds
etc.
Does this mean switch on ignition while depressing the brake pedal or once the pedal is fully depressed?
TIA,
mikeateves
