Binnacle Switches

Have just retrofitted Cruise Control to my 03 facelift TD5. I have located the switch in the correct place aboe the filler release.

There are 2 more blanks to the right - I am assuming that 1 is for the reverse sensor - the next retro fit - and I am not sure what the 3rd from top is for.

Also, there is a blank at the left of the ninnacle unit - underneath the rim that seems big enugh to take a rocker switch - any of you guys have this fitted with something.

Final blank is in the switch panel which contains hazards and screen demister etc - I have seen on some models that this contains the fuel release switch - is it used for anything else.

Any picture would be good

stick with me cus your lefts and rights are mixed up unless you are in a lefty.
switches to left of steering wheel, front fogs, rear fogs, just blank no wires behind, rear parking blank with wires behind.
switches to the right of steering wheel, rear wash, rear wipe, cruise, fuel flap.
underneth rim could be for either manual headlight level or electric mirrors.
hazard switch block can also contain front heated screen blank with wires behind, the free one is just a blank no wires behind if fuel flap button moved.

mat

Duh .... we still drive on the left in Wales ... I was just sleeping when I posted.

duh..... excuse me for trying to help you, but nowhere on your post does it say where you are !!!!
now is your question sorted or not.

yes thanks for the help. As I said I must have been as sleep when I wrote the Post.