Disco 2 air suspension ?

Hi all

Very quick question ,when i press the button on the dash how much should the back end raise?
and do i just press and release the button or hold it down for a while,and how do i then lower it again?

cheers
griff

you hold the button until it bongs, then it should raise approx 40-5omm or 2" in old money

cool thanks,and to lower????? press again?

yeah press again or drive to fast(think its 15mph) and it lowers itself

cool thanks mate

Bear in mind that for the suspension to pump up,you need to have the engine running and all doors and bonnet closed

Has to be in low ratio also

Ricksailhog said:

Has to be in low ratio also

Click to expand...

No it doesn't. You can raise or lower the rear end in either high or low.

+1. You're thinking of the Hill Decent

I'm confused now lol so does it work in low and high or only low? thats the air suspension i mean not the hill decent

Off-road rear suspension raise works in BOTH hi and lo ratios.
All doors must be closed and the engine running to make it work.
If the suspension is in the raised position before you start off, it will automatically revert to it's normal height when a speed of 18 mph is reached.
The air suspension can be lowered for loading or hitching if you either have a proper control fob (expensive) or have David Pye's modification incorporated. (Search the forum for further details)

The air suspension has nothing to do with the Hill Decent Control.