ACCELERATOR PEDAL RETURN SPRING FOR SERIES 3

Thread starter phillipclarke29
Start date Jan 7, 2020

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

phillipclarke29

New Member

Jan 7, 2020

#1

Hi
The throttle is getting a bit sticky on 1972 series 3. I bought https://www.lrparts.net/231393-accelerator-pedal-return-spring-for-land-rover-series-2a-3.html but it does not look big enough - do I need https://www.ebay.co.uk/itm/Land-Rov...-Pedal-Return-Spring-277455-x-1-/181204675248 instead.

tottot

Well-Known Member

Jan 7, 2020

#2

Cheap enough to get the two and try them out.

Colthebrummie

Well-Known Member

Jan 8, 2020

#3

Are you sure it's the pedal Spring causing the problem and not the linkage on the carb.

Col

phillipclarke29

New Member

Jan 8, 2020

#4

tottot said:
Cheap enough to get the two and try them out.

true, in for a penny etc...

phillipclarke29

New Member

Jan 8, 2020

#5

Colthebrummie said:
Are you sure it's the pedal Spring causing the problem and not the linkage on the carb.

Col

Well process of elimination - trying the spring first and then the carb

You must log in or register to reply here.

Similar threads

Parabolic leaf springs - shocks not fitting

Replies: 7

Views: 1K

Series 3 front door bottoms

Replies: 2

Views: 1K

Replies: 9

Views: 1K

Series 2 Land Rover Series 2a LWB 109" 1968

Replies: 1

Views: 1K

Start up advice

Replies: 18

Views: 2K

Share:

Reddit Pinterest Tumblr WhatsApp Email Link

Welcome To LandyZone, the Land Rover Forums!

Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

Registering is free and easy just click here, we hope to see you on the forums soon!