dazer200
Well-Known Member
- Posts
- 190
- Location
- Portsmouth
RR L322 2002 TD6 HSE
Hi everyone, after 3 days of re-seting codes and monitoring the behavious patterns of the car I am almost at a conclusion as to what to do.........nothing bad I may add !
As in my other posts I have a suspension inactive fault, left over night bags fine no sag and compressor is quick and tempreture monitored etc and all seems to be good there.
Everything is now pointing to the ABS module I will list my findings and se what you think also I am in Portsmouth so anyone know of any repairers withing say 100 miles that I could take the module to for repair ? I am trying to document and video as so it may help others like me in the future.
Re-set codes and car raises and lowers fine no errors on suspension.
Drive car under 25 MPH stop start and same all fine no suspension codes.
Drive car above 25 MPH and suspension inactive pops up on dash, read codes and one code everytime "articulation fault" read ABS and it says "trans gearbox CAN failure" " system momenterily disengadged" "Suspension Can error" (Icarsoft cant afford more)
Hit reset codes on ABS and it fails to do so. "will not reset"
Driving over bumps speed humps under 25MPH no codes.
Brakes seem to have a little stutter as if lower ball joints had play kind of stutter.
So fine below 25MPH go over that and the error pops up, ABS reads but wont delete codes (3) stutter on breaks and can error..ABS unit not communicating with other units like it is with reader ?
I have head of the pre pump failing and causing issues but am near certain its the ABS module.
If you know where I can get reconed please let me know.
Any input greatly appriciated as always, if I can ever help in Portsmouth area, tow whatever justa ask.
UPDATE:
SEE THREAD************** https://www.landyzone.co.uk/land-rover/air-suspension-update-fixed.377784/
Hi everyone, after 3 days of re-seting codes and monitoring the behavious patterns of the car I am almost at a conclusion as to what to do.........nothing bad I may add !
As in my other posts I have a suspension inactive fault, left over night bags fine no sag and compressor is quick and tempreture monitored etc and all seems to be good there.
Everything is now pointing to the ABS module I will list my findings and se what you think also I am in Portsmouth so anyone know of any repairers withing say 100 miles that I could take the module to for repair ? I am trying to document and video as so it may help others like me in the future.
Re-set codes and car raises and lowers fine no errors on suspension.
Drive car under 25 MPH stop start and same all fine no suspension codes.
Drive car above 25 MPH and suspension inactive pops up on dash, read codes and one code everytime "articulation fault" read ABS and it says "trans gearbox CAN failure" " system momenterily disengadged" "Suspension Can error" (Icarsoft cant afford more)
Hit reset codes on ABS and it fails to do so. "will not reset"
Driving over bumps speed humps under 25MPH no codes.
Brakes seem to have a little stutter as if lower ball joints had play kind of stutter.
So fine below 25MPH go over that and the error pops up, ABS reads but wont delete codes (3) stutter on breaks and can error..ABS unit not communicating with other units like it is with reader ?
I have head of the pre pump failing and causing issues but am near certain its the ABS module.
If you know where I can get reconed please let me know.
Any input greatly appriciated as always, if I can ever help in Portsmouth area, tow whatever justa ask.
UPDATE:
SEE THREAD************** https://www.landyzone.co.uk/land-rover/air-suspension-update-fixed.377784/
Last edited: