300tdi auto gearbox wanted, mine only selects reverse
- Thread starter theTman77
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
only select or only drive in r ,may only be clutch pack A easy enough job ifit is
ferretboy
Active Member
- Posts
- 413
- Location
- near hinckley
Drop the oil , check filter , look for metallic parts !! Check linkages etc , get a mechanic to diagnose problem!!!
lyron
Active Member
- Posts
- 536
- Location
- ibstock liecestershire
any chance of us knowing where you are. it would help. you never know you might have a fellow member who is near you and be able to advise.
ron.
ron.
Hi all thanks for your replays! I am in Kent near to Sittingbourne.
I did a bit of research before I posted & I came to the conclusion it could be the clutch A pack from the info I could find.
Does anyone know what this involves to fix & do I need to drop the box out to do it? I myself am not a mechanic but dont mind getting my hands dirty however my dad was (now retired) and between us we i think could we could fix it if we can find the right information, we have access to tools and a ramp to lift the disco up, so no problem there.
Any help or info would be much appreciated!!
I did a bit of research before I posted & I came to the conclusion it could be the clutch A pack from the info I could find.
Does anyone know what this involves to fix & do I need to drop the box out to do it? I myself am not a mechanic but dont mind getting my hands dirty however my dad was (now retired) and between us we i think could we could fix it if we can find the right information, we have access to tools and a ramp to lift the disco up, so no problem there.
Any help or info would be much appreciated!!
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
:
,once box is off its just a matter of removing bell housing and pump housing
good search find
,once box is off its just a matter of removing bell housing and pump housingHi, I've managed to find a replacement box for £175 not too far away which would probably cost me £200 all in to go & collect (and half a day of my time) or I can get a ZF master repair kit from Ashcroft Transmissions for £195 which also is going to take a day or more to take apart, and put back together, in both cases I will have to drop the box out.
To me the replacement box seems like the better option!
To me the replacement box seems like the better option!
I have just replaced the Auto box in my 300 TDI got everything back together now the thing wont start, we seem to have intermittent fuel issues, one minute its getting fuel the next its not, but when it is we have fuel at the injectors, the engine turns, but it wont start?? it seem like it wants to but something is stopping it?
We did damage a wire, that we discovered was popping the fuse on the fuel pump we have now fixed this and the fuse is no longer blowing, and all electricals seem fine apart rom the intermittent supply of fuel?
any help or advice would be much appreciated!
We did damage a wire, that we discovered was popping the fuse on the fuel pump we have now fixed this and the fuse is no longer blowing, and all electricals seem fine apart rom the intermittent supply of fuel?
any help or advice would be much appreciated!
Similar threads
