3 inch lift kit on ebay

Hi i was thinking of fitting one of these lift kits to my freelander , the price was 80 quid , although i am not to sure that fitting one of these kits wont stress out the half shafts because of the altered angle going into the gearbox at the front any feedback greatly appreciated hope its not to stupid a question

This is 25mm too far.

You will end up with massive problems, even if you can get the camber sorted.

Best kit out there is made by ASA Fabrication. Costs a bit more though. Much better quality and won't stress the transmission so much.

pm SES88 or find the thread on here about lift kits. He might still have some available.

thanks i was concerned about the angle <camber > thats why i asked the masses

That's meant for the sport which is an inch lower than a standard one so can take the extra inch. Standard ones 50mm is max and that needs mods

ill leave well alone i think thanks guys

Get the 40mm kit from SES88 on here - the welding is a work of art and the finish superb. Simon takes real pride in his work and it shows in the quality of the finished product.