Hi there recently bought some 18 inch wheels with general grabber at2 tyres on for winter for my td5 of eBay loads of tread on them. They were advertised as 255 55 18 but I didnt realise till I got them home they were 255 60 18. Everythings fine apart from they catch passenger side when on full lock the drivers side full lock doesn't catch. Is this normal for this size ? Cheers.
255 60 18 rub on full lock
- Thread starter Mike Hunt
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ratty
I'm not special I'm limited edition
- Posts
- 34,277
If you adjust the lock stops they won't catch any more.
50 pence
New Member
- Posts
- 1,471
- Location
- Cambridgeshire
The stops fitted to the D2,s with 18" wheels were 29mm, and the stops fitted to D2,s with 16" wheels were 23mm.
Did you car have 16",s on before you put the 18",s on ?.
I,ll try and fine the part numbers for the longer ones, but even Landrover struggle to find them.
Del.
Did you car have 16",s on before you put the 18",s on ?.
I,ll try and fine the part numbers for the longer ones, but even Landrover struggle to find them.
Del.
- Posts
- 66,839
- Location
- The Wooly Witch
You've been looking for a long time, couldn't you find any the proper size.
Can you still get them in this size guys? Any ideas where? I tried paddocks and they said they can't get this tyre in this size anymore it's being fazed out
It had 255 55 18 on before never noticed any catching. And the answer to your question is at2 couldnt find them anywere only the new AT. Got these for a good price at2 tyres 10mm on 18 inch rims ready to go.
