200tdi fan/heater box cables

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

wowa75

Member
Posts
91
Location
Vancouver Island
Hi and Merry Christmas!
Hooking up my heater box after rebuild and can't recall cable control set up.
2 cables from hot/cold & up/down switch (right sided control) and 1 cable from fan speed side (left side control).
Where doe the cable from the fan speed switch go??....doesn't make any sense as speed changes based on switch position.
I believe hot/cold goes on top of the box and up/down goes on the side of the box.

Thanks
 
The up down / screen or footwell cable goes to a flap in the lower dash.
It is the fan cable that goes to the lower side of the heater box.
I forgot to reconnect mine when I gave the box an overhaul and have not bothered since as without the fan running little if any air warm or cold enters the cab.
 
The up down / screen or footwell cable goes to a flap in the lower dash.
It is the fan cable that goes to the lower side of the heater box.
I forgot to reconnect mine when I gave the box an overhaul and have not bothered since as without the fan running little if any air warm or cold enters the cab.
I did the same and in winter just use a tie wrap under the bonnet to select hot.
 
Where doe the cable from the fan speed switch go??....doesn't make any sense as speed changes based on switch position.
The theory is that when the fan is off a flap closes in the heater box to block any air flow into the cab. The reality is it does nothing really. Positioning is as @tottot states above.
 
Back
Top