200tdi brake valve port identification

Tirran · Jun 30, 2020

Schoolboy error when stripping my Defender for rebuild, didn’t note which port was which on the brake valve or the master cylinder. The valve is NTC8836, I looked at the manual I have and it is unclear to me, can anyone assist ?

BTW what is the yellow ty- wrap for?

thanks

turrican · Jun 30, 2020

There's a diagram on this page for your part number
https://www.lrworkshop.com/parts/NTC8836

Tirran · Jun 30, 2020

turrican said:
There's a diagram on this page for your part number
https://www.lrworkshop.com/parts/NTC8836

Turrican, I have seen that one, my concern is the orientation of the valve.

turrican · Jun 30, 2020

Have found another picture which shows the orientation top right
https://images.app.goo.gl/85H9RQvzm17AQpXr9

Tirran · Jun 30, 2020

turrican said:
Have found another picture which shows the orientation top right
https://images.app.goo.gl/85H9RQvzm17AQpXr9

Cool, thanks, I’ll try that and, once I get the damn thing completed test them out. If I hit a tree I’ll know it wasn’t correct much appreciated as this is a job I can get done.

200tdi brake valve port identification

Tirran

Well-Known Member

Attachments

turrican

Well-Known Member

Tirran

Well-Known Member

turrican

Well-Known Member

Tirran

Well-Known Member

Similar threads