200 di coversion

landy1959/series2 · Jul 12, 2012

im just finishing off my 200 di conversion, what do i do with the outlet tube coming from the 'can; shapped item just below the plastic breather pipe on the fuel side of the engine ?

jamesmartin · Jul 12, 2012

normally goes into turbo inlet pipe from filter

TheKeymeister · Jul 12, 2012

Or is he on about vacuum pipe from vacuum pump?

peter8315 · Jul 12, 2012

i think he means the vacum pipe , just block it off

landy1959/series2 · Jul 13, 2012

Thanks guys, thats it a vacuum pump, I will blank it off or should I put some sort of breather on it ?

TheKeymeister · Jul 13, 2012

Stick a bolt in the end and cable tie it, saves it destroying itself or something, just in case you ever put a brake servo on

jamesmartin · Jul 13, 2012

needs locking off with a short hose and bolt as said in the end ,its a vacuujm pump which exhausts into cam gallery it will help pressurise engine if not capped and working

200 di coversion

landy1959/series2

New Member

jamesmartin

Well-Known Member

TheKeymeister

Active Member

peter8315

Active Member

landy1959/series2

New Member

TheKeymeister

Active Member

jamesmartin

Well-Known Member

Similar threads