7tastic
Active Member
- Posts
- 139
- Location
- Isle of Mull
Hi
Just replacing the front door hinges on my 110, a bit of drilling and sawing but nothing too difficult.
I'm taking off, painting then replacing with stainless bolt the rear doors (not back door) hinges.
Ive done the upper ones and about to start the lower ones but cant figure out how the nuts are held in? Are they the same as the fronts with captive slidey things or the same as the top hinge with a nice captive nut plate?
The bolt kit I got only had enough captive springy things for the front.
I don't want to cut anything off to find out without ordering the parts (if needed) to put it back together.
Just replacing the front door hinges on my 110, a bit of drilling and sawing but nothing too difficult.
I'm taking off, painting then replacing with stainless bolt the rear doors (not back door) hinges.
Ive done the upper ones and about to start the lower ones but cant figure out how the nuts are held in? Are they the same as the fronts with captive slidey things or the same as the top hinge with a nice captive nut plate?
The bolt kit I got only had enough captive springy things for the front.
I don't want to cut anything off to find out without ordering the parts (if needed) to put it back together.