110 Rear 3 man bench
- Thread starter bigjak
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Discokids
Well-Known Member
- Posts
- 3,160
- Location
- Derbyshire
Mine didn't attach to that odd angled bracket, they bolted straight through the top of the wheel arch.
on the backs there is a bracket at the rear that I need to get the corresponding bracket to fit into the cappings, then at the front there is just a tongue that locates under the cappings.
As far as I can tell that are too long to fold up, the bottom would clash with the seat back on the second row.
In the pic attached there seems to be spacers at the front? I think this is to take up the difference in floor/bracket height.
As far as I can tell that are too long to fold up, the bottom would clash with the seat back on the second row.
In the pic attached there seems to be spacers at the front? I think this is to take up the difference in floor/bracket height.
Attachments
pete1987RRC
Well-Known Member
- Posts
- 5,136
- Location
- East Midlands
I would but my rear seat config is different, it's a 1 man and 2 girl unit.
I think I have parts 2,3 and 9 in the shed.
Similar threads
