Firstly a search has revealed nowt. Shame.
My D prefix 110 CSW has different latch/locks on the front to doors compared with the rear one. The rear has what appears to be common and current. The lock barrel sits above the handle. The lock barrel is released by a pin going in from the side. I would ideally like to have the same on the front door. 1 key and all that.
The front doors have what I believe to be older (obselete?) locks that have the door handle pivoting around them. The issue here is that the barrels are held in with a small screw that runs allong the axis of the lock. ie they are not the same as the rear one. I can't find these barrels, I am told the lock/latch set up is redundant , any suggestions please. Internally the front doors open by the flat lever at the front of the door. The push down locks, that don't work, and thing stick type not the more modern ones.
Anyway any suggestions? My rear door is about to be replaced and is currently undrilled so I am happy to play about a bit,
My D prefix 110 CSW has different latch/locks on the front to doors compared with the rear one. The rear has what appears to be common and current. The lock barrel sits above the handle. The lock barrel is released by a pin going in from the side. I would ideally like to have the same on the front door. 1 key and all that.
The front doors have what I believe to be older (obselete?) locks that have the door handle pivoting around them. The issue here is that the barrels are held in with a small screw that runs allong the axis of the lock. ie they are not the same as the rear one. I can't find these barrels, I am told the lock/latch set up is redundant , any suggestions please. Internally the front doors open by the flat lever at the front of the door. The push down locks, that don't work, and thing stick type not the more modern ones.
Anyway any suggestions? My rear door is about to be replaced and is currently undrilled so I am happy to play about a bit,
