300tdi inlet manifold full of dried oil

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

RustyDefender

Well-Known Member
Posts
564
Location
Lake District
Any ideas on cleaning it out and the causes? Oil seal in turbo?
 

Attachments

  • IMG_9043.jpg
    IMG_9043.jpg
    271.3 KB · Views: 65
  • IMG_9044.jpg
    IMG_9044.jpg
    394.4 KB · Views: 75
  • C5BA07E0-28A2-43E7-9E3E-E9DC3B7AE2ED.jpg
    C5BA07E0-28A2-43E7-9E3E-E9DC3B7AE2ED.jpg
    335.1 KB · Views: 68
If the intercooler and intake hasn't been cleaned in a couple of years that isn't bad

I would clean all the pipes and fittings from the turbo to the inlet manifold as well as wipe out the intake pipe - last couple of inches after the pipe connecting from the oil separator

then maybe monitor the last pipe going into the inlet manifold as well as the short elbow that comes out of the turbo in a month or 2

I nearly want to say that crud is normal if not cleaned for a long time

Actually the fact that you say it's dry tells me that the turbo isnt gone as the oil has had time to dry
 
If the intercooler and intake hasn't been cleaned in a couple of years that isn't bad

I would clean all the pipes and fittings from the turbo to the inlet manifold as well as wipe out the intake pipe - last couple of inches after the pipe connecting from the oil separator

then maybe monitor the last pipe going into the inlet manifold as well as the short elbow that comes out of the turbo in a month or 2

I nearly want to say that crud is normal if not cleaned for a long time

Actually the fact that you say it's dry tells me that the turbo isnt gone as the oil has had time to dry
Got a new intercooler + pipes fitted last night.. but got to clean this thing out just wanted to make sure i wasn't putting it back on for it to be full of oil in a few weeks time
 
Back
Top