Megamagelol1
Member
- Posts
- 92
- Location
- Colchester
I have ordered some smaller needles that are coming tomorrow, I’ll do it again tomrrow to double check, the range on my reader is automatic, but it says in the corner (k) or (m) on all of these reading is was showing,Are you sure that the readings are kOhm not Ohm?, those readings are far out of what should be ... anyway you'll have to do some gymnastics to crawl under, unplug the 3 solenoids on the valve block then read again from C0647 same pins with C0391/0377 connected and diconnected ... for C0377 insert a needle into the cavities and measure on that
I will do it all again tomorrow with the needles, and will update you tomorrow