Freelander 1 egr bypass help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

chris100e

Member
Posts
18
Location
uckfield
I have purchased a egr boost gauge removal blanking bypass kit. It came with no fitting instructions.
the kit contains new housing to replace the egr valve/stop cap/blanking plate //two metal disks.

the new housing has a small tube welded to its side. I assume this can be used for a boost gauge.
blanking plate assume for exhaust manifold
stop cap ?
metal disks?
If this kit is to remove the erg , what do I do as the stainles steel pipe from the old erg has a cooling pipe and bleed nipple attached to it. ?

looked on web but no luck
 
All vehicles requiring an MOT are currently tested for CO2 and hydrocarbons, not NOX. Visual checks for excessive smoke are also carried out, although it seems to be at the tester's discretion as to what constitutes "excessive". The official MOT manual suggests that sufficient smoke that could obscure the view of road users behind you would be a fail.

As for NOX, this is a by-product of the diesel combustion process, mainly due to the higher combustion temperature of diesels. The EGR system bleeds a portion of the exhaust gasses back into the inlet which has the effect of lowering the combustion temperature, and hence the NOX emissions.

NOX is a well known contributor to, and direct cause of, respiratory problems and this is why legislation was introduced to control how much is emitted by diesel vehicles, hence the development of EGR systems. However, EGR systems affect engine performance and anyone who's ever taken off an EGR valve and inlet manifold to clean them out will see how much black sticky gunk ends up clogging them up. This means more maintenance which means more running costs. It's no wonder people want to bypass them.

And of course the government realise this so in future the MOT will be tougher around emissions control.

Of course, there will be ways of tampering with them that leave them still looking standard, and your local MOT tester will still have his own interpretation of the guidelines so it may not be the end of diesels as we know them yet.
 
Won't you need to keep it on for the new MOT??

Yep. It'll be a major fail in the new MOT.

I thought they only checked nox gases which the erg does not effect

The EGR is only there to reduce NOX emissions. Removal will increase NOX and also fail the new MOT.

Additionally unless the EGR bypass supports the exhaust transfer pipe, the pipe will break off very quickly, which is a major headache.
 
Many thanks all to this old thread (oops I typed threat, which could also fit in well, but) ,
but still new to my old enquiring mind.
My old girl has done 180.000 plus miles, runs very well, but fancy trying a cheap EGR replacement for use in "Non MOT days"
this will also give me some time later to de muck the pipes needed along with the EGR replacement just before its MOT.
I`m finding I get a slight hesitation from standstill so the the thought of trying the BYPASS jobby.
For`s and Against`s
Just asking coz I can, but thanks anyway.
Ian.
 
Back
Top