James.
Member
- Posts
- 55
- Location
- Ferndown, Dorset
After reading alot on here and other forums I decided to do this tutorial as this really isnt as bad as people think .. yes there's alot to do but its all simple stuff .... I've even taken pictures ![Stick Out Tongue :p :p](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
... on a few pics there are no screws in the holes as I had already taken them out before taking the picture![Roll Eyes :rolleyes: :rolleyes:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Hope it helps!
Remove 2 screws located on the sides by the gearstick ... its a torx but a alen or flat head will fit ok![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
between the gearstick and the handbrake there is a little cover, pop it off and you will find 2 screws (The ends will be rusty as these stick out uner the car ...good idea LR!)
Open the handbrake cubby box and undo the four screws and remove this.
There are another 2 screws to undo (right side of pic holding the surround on)
Disconnect the plugs for the switches (mine were rear window & sunroof)
Now drop the Handbrake slightly and slide the surround off.
now unclip the gear surround... lift the opposit end to the HDC button and then it just unclips off.
Disconnect the HDC and unscrew the gearknob.
With a flathead under the bottom front and lift up and foward ... litrally pops off.
Undo the 2 screws.
Now the control surround will come free an inch or so.
Disconnect the buttons on the Left and Right.
...along with Lighter Socket.
Last four screws holding stereo in ... Job Done!
This is the Plug on the back of my 6CD HK System.
... on a few pics there are no screws in the holes as I had already taken them out before taking the picture
Hope it helps!
![80917698.jpg](/proxy.php?image=http%3A%2F%2Fimg195.imageshack.us%2Fimg195%2F2128%2F80917698.jpg&hash=8bf2c36adef1d182f3634c4785fc7979)
Remove 2 screws located on the sides by the gearstick ... its a torx but a alen or flat head will fit ok
![26645651.jpg](/proxy.php?image=http%3A%2F%2Fimg28.imageshack.us%2Fimg28%2F1894%2F26645651.jpg&hash=0c8190bb98c00e7822b55148b3d90cd3)
between the gearstick and the handbrake there is a little cover, pop it off and you will find 2 screws (The ends will be rusty as these stick out uner the car ...good idea LR!)
![87763962.jpg](/proxy.php?image=http%3A%2F%2Fimg4.imageshack.us%2Fimg4%2F7486%2F87763962.jpg&hash=98afc289276adb67f5c9adcfa49591fd)
Open the handbrake cubby box and undo the four screws and remove this.
![39601706.jpg](/proxy.php?image=http%3A%2F%2Fimg534.imageshack.us%2Fimg534%2F6780%2F39601706.jpg&hash=f7adadbb2b46a445b0cbf06ec0c54cf4)
There are another 2 screws to undo (right side of pic holding the surround on)
![83918266.jpg](/proxy.php?image=http%3A%2F%2Fimg716.imageshack.us%2Fimg716%2F3137%2F83918266.jpg&hash=9b4334cc355bcb9c5096d12085206f41)
Disconnect the plugs for the switches (mine were rear window & sunroof)
![93539237.jpg](/proxy.php?image=http%3A%2F%2Fimg252.imageshack.us%2Fimg252%2F3254%2F93539237.jpg&hash=74bfcdade8c36e7d439430167888fb06)
Now drop the Handbrake slightly and slide the surround off.
![39526294.jpg](/proxy.php?image=http%3A%2F%2Fimg684.imageshack.us%2Fimg684%2F87%2F39526294.jpg&hash=7aa20f46d284d65aad03aae34c206207)
now unclip the gear surround... lift the opposit end to the HDC button and then it just unclips off.
![33398528.jpg](/proxy.php?image=http%3A%2F%2Fimg341.imageshack.us%2Fimg341%2F2971%2F33398528.jpg&hash=eea86c84651974adde2270df208b6071)
Disconnect the HDC and unscrew the gearknob.
![23395858.jpg](/proxy.php?image=http%3A%2F%2Fimg832.imageshack.us%2Fimg832%2F1223%2F23395858.jpg&hash=abcb5f4988b85a42c0f87f739624c3fd)
With a flathead under the bottom front and lift up and foward ... litrally pops off.
![17653309.jpg](/proxy.php?image=http%3A%2F%2Fimg848.imageshack.us%2Fimg848%2F3576%2F17653309.jpg&hash=823ab24cdea0aaaccd9b411ee157216a)
Undo the 2 screws.
![76728550.jpg](/proxy.php?image=http%3A%2F%2Fimg406.imageshack.us%2Fimg406%2F3184%2F76728550.jpg&hash=b510a7563468f6ba6e8b677647eefa41)
Now the control surround will come free an inch or so.
![60554825.jpg](/proxy.php?image=http%3A%2F%2Fimg31.imageshack.us%2Fimg31%2F8425%2F60554825.jpg&hash=a0d750c94ecf0c836b128f6094596f79)
Disconnect the buttons on the Left and Right.
![37443640.jpg](/proxy.php?image=http%3A%2F%2Fimg841.imageshack.us%2Fimg841%2F295%2F37443640.jpg&hash=12ad2e9b987ffae58c3cee979f07bb80)
...along with Lighter Socket.
![35816629.jpg](/proxy.php?image=http%3A%2F%2Fimg692.imageshack.us%2Fimg692%2F2673%2F35816629.jpg&hash=dc2285962f9a8f5e7119887cb2d51d85)
Last four screws holding stereo in ... Job Done!
![76069717.jpg](/proxy.php?image=http%3A%2F%2Fimg151.imageshack.us%2Fimg151%2F180%2F76069717.jpg&hash=443d2d77b0610fd940ad2d16144d5a5e)
This is the Plug on the back of my 6CD HK System.