Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. brian47

    Aftermarket tyre pressure monitors. A bit of a warning.

    A couple of years back I fitted aftermarket tyre pressure monitors to my Disco. There are basically two types; the ones that fit inside the tyre and replace the existing tyre valves and the screw-on type which just replace the normal valve caps. I chose the valve cap type, largely because I...
  2. brian47

    Disco 2 3 amigos. It's happened to me now ....

    Yep, the dreaded 3 amigos plus the handbrake light. My Nanocom says it's the right rear sensor intermittent, so since I intend to change over my wheels for the "winter set" at the weekend, I'll scrutinise it with an "intense scrute" then. The thing that can throw some people is the appearance of...
  3. brian47

    Using a multimeter on a vehicle electrical system

    There some very good, useful and highly informative threads here on the forum about vehicle electrics, how and why, etc. @cowasaki's Car electricals tutorials Part 1: https://www.landyzone.co.uk/land-rover/tutorial-car-electrics.245168/ Part 2...
  4. brian47

    Byway map

    It's probably not of much use to the experienced green lane old hands but for those new to the pleasures of "off road" driving, this could be a useful resource:- https://www.bywaymap.com/index.html Use it at your own risk. See post #2, below.
  5. brian47

    What's it worth questions ....

    For those who seem to just turn up with the question, "How much is my (insert LR model here) worth?", there's a quite useful website which I found attached to the Stratstone (Swansea) website which gives a range of values for the vehicle:-...
  6. brian47

    Disco 2 Replacing the rear suspension air bags.

    Being a bit long in the tooth, like what I am, I put the Disco into the local indie garage for them to change the "windy-springs", rather than me scrambling about underneath to do the job. It was a good thing I did, when they took the old bags off they were confronted by some rot holes behind...
  7. brian47

    Freelander 1 Hi-level brake light.

    Can somebody tell me what's going on with this light. The handbook says 21 watts, the electrical diagrams say 21 watts, so I bought a couple of 21 watt capless wedge bulbs for my neighbour's Freelander 1, and guess what? Yep, they don't fit, they're physically just too big. I've looked online...
  8. brian47

    Acoustic cover mountings

    Hi people I have what looks like it might be a fairly common with the acoustic cover mountings on the Td5. The two bolts on the exhaust side of the engine screw into a pair of blind holes drilled and tapped in the cylinder head, and they seem OK. The bolt on the inlet side of the engine screws...
  9. brian47

    Freelander 1 Expansion tank cap query

    Hi peoples As a Disco owner, I don't normally do Freelanders, but a neighbour has a FL1, 1.8 petrol, 2000MY. Can one of you please confirm for me the part number of the expansion cap please. So far I have:- PCD100160 PCD500030 Thanks.
  10. brian47

    Mynydd Eglwysilan

    This might be one for the local South Wales Glass rep. I'm not into green-laning really, but I noticed on the OSSJAY blog that there's been some disputes going on on the route across the Eglwysilan hillside from Pontypridd to Nelson. I used to travel this route almost weekly, sometimes even...
Back
Top